Centrifuge Tubes

Half-plug seal, sealing point, triple-thread screw.
A centrifuge tube filled with innovative design to achieve high airtightness.

Airtightness

■Sealing point

The proper cap torque-position is informed by the click, when one of the 3 protrusions inside the lid fits into the groove on the tube.

The protrusions on the cap indicate you the best sealing position when if fits on the groove.

The left picture shows too much screwing when the protrusions go over the groove.

The left picture shows posible loosening the cap and sample leakage when the protrusions come before the groove.

■Half plug seal

Bigger sealing area performs higher airtightness.

■Tripple thread screw

Triple thread screw enables easy open / close with less rotation.
It also prevents screwing a cap diagonally.

※[test condition]
Fill centrifuge tube with 100% EtOH to 80% of the max. volume (12 mL for 15 mL tube, 40 mL for 50 mL tube). Place the tube upside-down under the room templarature and check weight loss with time.

Convenient function

■Wide writing space

It has wide writing space on a cap and the frosted area on the body.

■High precision-scale till the cone top

Graduation is molded so that it does not fade away. Scale is made till 0.5 mL line at the cone.

Maximum centrifugal force

15 mL centrifuge tube:18,000×G(14,100 RPM)
50 mL centrifuge:18,000×G(14,100 RPM)

Tested with conical centrifuge tubes, 15mL and 50mL.
(We have not conducted validation in a self-standing type.)

[Test condition]

Centrifuge
Temp.
Distilled Water

Rotor
Centrifugation

TOMY MX-305
20℃
12 mL for 15 mL CF tube
40 mL for 50 mL CF tube
AR-510-04
5 minutes

RNase/DNase/Human-DNA free
Pyrogen test
esults:Endotoxin level less than 0.05 EU / mL
※according to Internal test

Centrifuge Tubes Lineup

Tube: made of Polypropylene   Cap: made of Polyethylene

Cat. No.ItemUnit
1332-015S15 mL Centrifuge tubes, Conical Bottom, White Cap480 pieces
(48 pieces × 10 bags)

Tube: made of Polypropylene   Cap: made of Polyethylene

Cat. No.ItemUnit
1342-050S50 mL Centrifuge tubes, Conical Bottom, White Cap480 pieces
(24 pieces × 20 bags)

Tube: made of Polypropylene   Cap: made of Polyethylene

Cat. No.ItemUnit
1342-550S50 mL Centrifuge tubes, Self-Standing, White Cap480 pieces
(24 pieces × 20 bags)

Product Inquiry

※We also accept inquiries for mass production development of custom shapes, such as OEM and ODM, for plastic products.